Philippine long boom excavator high quality excavator long reach boom arm customized CAT320D 18Meters
Excavator long reach fronts introduction
As for the elongated arm excavator, I believe that many friends in the mechanical industry are familiar with it. Municipal construction, improvement of subway traffic, sewage reconstruction, river cleaning and so on require a large number of construction machinery and equipment, and the standard work of mining machinery engineering should not be completed. Therefore, the elongated arm excavator uses super-long arm and super-long arm. It shows that they can play an important role in dredging, revetment and slope, while subway construction is restricted by the ground environment conditions.
Here are some advantage of long arm excavator
- Long reach Boom-Arm is ideal for river and sea dredging on land or barge.
- lubrication concentrate system, you can see there are 3 pieces lubrication tube , they all concentrate here , it is easy and convenient for the operator to refill the lubrication oil..
- our bushing at the boom base , you can see the bushing is graphite copper sleeve material.
- Ideal for marine wall construction.
- our bushing at the boom base , you can see the bushing is graphite copper sleeve material.
- The design is comprehensively simulated, ensures design integrity and identifies potential stress and fatigue points.
- the bushing in the boom middle , we use steel material , if client have special require ,we also can use copper sleave material.
- The welding on the boom end is 4 passes,and 3 layers.
Each part warranty of excavator extention arm | name | main material | warranty(day) |
| Boom | Q355B | 360 |
| Arm | Q355B | 360 |
| Bucket | Q355B | 90 |
| Bucket cylinder | - | 180 |
| Linkage assenbly | Q355B | 180 |
1. Material: the material of the big and small arms is Shaogang q355b, the iron pipe on the arm is national standard cold drawn seamless pipe, the pin shaft is 40Cr, the high-pressure hose is a joint-venture pipe with 4 layers of steel rings, the grease pipe is a single-layer hose, and the bushing driven into the base of the boom is graphite alloy copper sleeve.
2. Configuration: one set of big and small arms, six pin shafts, four high-pressure hoses, three grease pipes, one set of connecting rod assembly, one bucket cylinder and one bucket.
3. Product advantages: plasma cutting, machine milling, robot welding, boring after welding, assembly line production operation, and better quality assurance. It can be customized according to the working conditions to meet the construction needs of different users. The opening angle of the large and small arms can reach 163 degrees, and the excavation radius and height are larger.
4. Working conditions applicable to the lengthening arm: Municipal Engineering, subway construction, river dredging, reservoir cleaning and other water conservancy projects.
-
Enhanced Lifting Capacity: Another advantage of an excavator with an extended boom is the increased lifting capacity it offers. The longer boom enables the machine to lift heavier loads and handle larger objects with ease. This is particularly advantageous in construction sites or material handling tasks where heavy objects need to be lifted and transported over longer distances.
-
Reduced Machine Repositioning: With an extended boom, the excavator can cover a larger area without the need for frequent repositioning. This not only saves time but also increases productivity on the job site. The operator can complete tasks more efficiently as they can operate from a fixed position and minimize interruptions caused by moving the machine.
Product Tags:
|
|
Komatsu Excavator Long Reach Boom , Excavator Attachments Long Reach Arm CAT320 PC200 Images
|
